FM Mattsson tronic WMS, hospital mixer, battery operation

Find retailers
Description
Chrome
Article number
16602500
GTIN
7391887251160

PROPERTIES

  • WMS-mixers with possibilities of wireless connection (subscription is required)
  • Adjustable hygiene flushing, intervals and rinsing time (to avoid stagnant water)
  • Logging of all flushings with point of time, water consumption and temperature for individual mixer or group of mixers (minimum, maximum and average values)
  • Battery monitoring
  • Built-in temperature measurements of mixed water temperature
  • Programmable temperature stop, the mixer will turn off directly at set maximum temperature
  • With thermostatic function
  • Temperature handle with safety stop at 38°C
  • Adjustable maximum temperature, pre-set to 42°C
  • Soft closing solenoid valve
  • Safe against vandalism, complete in metal
  • Eco (energy and water saving constant flow aerator, 5 l/min at 200–600 kPa)
  • With fixed spout
  • The mixer is activated by holding a hand in front of the sensor eye. Once started the mixer will run for at least 6 seconds and will continue to run as long as the hand is in front of the sensor.
  • Flush Timeout - safety shut-off to prevent flooding, maximum of 60 seconds
  • 60 sec. rinse time via sensor
  • Can be turned off by solenoid valve (eg for cleaning)
  • Low power consumption - Long life
  • Equipped with system for thermal disinfection against legionella
  • Battery operation, can be converted to mains operation
  • IP class sensor, IP67
  • Approved non-return valves, EN-Standard EN1717

    Installation:
  • Note! Gateway and a subscription is required for WMS
  • Automatic sensor calibration
  • Easy to change battery, without turning off the water supply
  • Mains operation requires installation of the AC adapter FMM S600132, and power supply FMM S600129 alternatively transformer FMM S600128

    Settings:
  • Adjustable max temperature
  • With Gateway and WMS:
    - Hygiene flushing with adjustable time and intervals
    - Initiate hot water rinsing
    - Programming of rinsing times, temperature alarm och temperature stops
    - Alert signal if exceeding the time limit for stagnant water (the latest flushing)
K Tronic vägg 160cc och 150cc WMS.jpg
No. FMM No. RSK Description
1 16221500 8438800 On/off handle, complete (for basin mixer)
2 39030000 8295347 End cover, chrome, 2 pcs
3 38525000 8218893 Stop ring (for basin mixer)
4 16280000 8483159 Mixing valve (for basin mixer), Lead Free
4 16280100 Mixing valve (for basin mixer)
5 16201000 8553500 Solenoid valve
6 58670000 8483157 Spout, L=150 mm
7 29142200 8281524 Housing M22 int.
8 16292000 8483161 Nipple
9 39710800 8591967 Nipple M18x1-G1/2 for shower mixer
10 16222600 8438816 Cover plug for battery, black
11 32990000 8440588 Spout
12 S600135 8483191 Battery
13 16291500 8438803 Inlet connectors 150 c/c (left-handed thread)
14 16290000 8438802 Filter, 2 pcs
15 16291600 8438804 Inlet connectors 160 c/c
16 29301000 8439698 Aerator M24 ext.
17 16281000 8218892 Termostatic unit (for shower- and hospital mixer)
18 38515000 8218894 Stop ring (for shower- and hospital mixer)
19 16211500 8438808 On/off handle, complete (for shower- and hospital mixer)
20 29100500 8281532 Aerator insert, 5 l/min at 200–600 kPa
21 16216200 8438812 Electronic unit WMS (for shower mixer)
22 16216300 8438813 Electronic unit WMS (for mixer with overhead spout)
23 16216400 8438814 Electronic unit WMS (for mixer with underlying spout)
24 58643000 8394022 Limitation segment (for mixer with underlying spout)

modal.bvb.desc;

Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).

Leadfree

Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.

Energyclass

Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.

modal.sundahus.title

modal.sundahus.desc