GARDA kitchen mixer
Garda is a range of mixers with a clean, minimalist design. A Garda mixer enhances the overall interior of modern kitchens, and has our unique technical features including a soft-close mechanism and a ceramic seal. The spout is replaceable, so you can easily vary the mixer’s appearance according to your preference. The choice is yours.
- Description
- Chrome, with CU Ø10 mm
- Article number
- 96400000
- GTIN
- 7391887229572
PROPERTIES
- Ceramic cartridge with soft closing function
- Adjustable flow control and temperature limiter
- Eco Flow (energy and water saving aerator)
- Swivel spout 110°
- Hole diameter Ø32-35 mm
Backflow protection unit type
Enter your e-mail address, then the parts list will be sent to your inbox.
| No. | FMM No. | RSK | Description |
|---|---|---|---|
| 1 | 59400000 | 8591864 | Lever, complete, L=95 mm |
| 2 | 38731006 | 8591765 | Lock screw |
| 3 | 59410000 | 8591863 | Cover lid with colour marking |
| 4 | 59330000 | 8591829 | Cover ring, chrome |
| 5 | 38051000 | 8241719 | Fastening nipple,chrome |
| 6 | 59110009 | 8591755 | Ceramic cartridge, not cold start (red ring), retail packed |
| 7 | 59705000 | 8154081 | Spout, Garda low spout |
| 8 | 59752200 | 8242199 | Aerator M21,5 ext., 7–9 l/min at 300 kPa |
| 9 | 60841000 | 8591891 | Key for aerator M21,5 x 1 |
| 10 | 37204029 | 8593089 | Sealing rings, 2 pcs |
| 11 | 37802850 | 8141748 | O-ring 42,2x3,0 |
| 12 | 39141000 | 8186888 | Fastening kit, for mixers without on/off valve |
DOCUMENTS
modal.bvb.desc;
Accepted installation instructions
Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).
Leadfree
Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.
Energyclass
Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.
modal.sundahus.title
modal.sundahus.desc