Cone remover tool/adapter

Description
AdapterFor pipe Ø12 and Ø15 mm and/or Ø18 and Ø22 mm pipes (Included in FMM 6098-2000)
Article number
60982010

PROPERTIES

  • For mixer mounts
  • For pipe Ø10. With adapters for pipe Ø12 and Ø15 or Ø18 and Ø22
  • For removing the cone while keeping the pipe in one piece. The gasket surface/flange on the cone is cut off so that the end of the tip of the pipe is made visible. The cone is pulled onto the adapter.

DOCUMENTS

modal.bvb.desc;

Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).

Leadfree

Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.

Energyclass

Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.

modal.sundahus.title

modal.sundahus.desc