9000E bath mixer

Description
Chrome, 40 c/c, pipe connection down
Article number
81920000
GTIN
7391887240706

PROPERTIES

  • Soft closing with ceramic cartridge
  • Swivel spout with built-in diverter
  • With ceramic sealed headwork
  • With wall fixing
  • Projection from wall 185 mm
  • Approved non-return valves, EN-Standard EN1717
Backflow protection unit type EB
K 9000E 40cc.jpg
No. FMM No. RSK Description
1 58500000 8591936 Lever, complete, L=90 mm
1 58501750 8591937 Lever, complete, L=150 mm
1 58501800 8592048 Lever, complete, L=180 mm
2 58510000 8591944 Cover lid with colour marking
3 58520000 8591945 Cover sleeve
4 58530140 8241726 Fastening nipple with service tool
5 29390000 8295356 Fastening nipple
6 60770000 8591918 Service tool
7 59130009 8591972 Ceramic cartridge with tools, carton
7 59120009 8591949 Ceramic cartridge with service tool, cold start (green ring)
8 82990000 8154073 Swivel spout with integrated diverter
9 39754000 8591969 Nipple M18x1 with o-ring for bath mixer
10 38521000 8295345 Stop ring
11 38086000 8439701 Locking screw
12 29142400 8281526 Housing M24 ext., 13 mm
13 39710800 8591967 Nipple M18x1-G1/2 for shower mixer
14 35860250 8242303 Spout, L=250 mm, 7–9 l/min at 300 kPa
15 29888100 8241186 Nipple M18x1, without tongue
16 37801550 8295350 O-ring 15,54 x 2,62, 2 pcs
17 29120900 8242390 Aerator M24 ext., 7–9 l/min at 300 kPa, light green
18 29102650 8281547 Aerator insert, 20–24 l/min at 300 kPa
19 29712000 8591530 Wall bracket for 40 c/c mixers, complete
20 38692800 8591974 Cover, chrome, 2 pcs

modal.bvb.desc;

Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).

Leadfree

Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.

Energyclass

Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.

modal.sundahus.title

modal.sundahus.desc