9000E shower mixer

Chrome, dark grey handles, 40 c/c, pipe connection down
Article number


  • Note! 40 c/c
  • EcoSafe® mixer
  • With shower connection down
  • Pressure balanced thermostatic mixer
  • With ceramic sealed headwork
  • With wall fixing
  • Temperature handle with safety stop at 38°C
  • Approved non-return valves, EN-Standard EN1717
  • Shower outlet projection from wall: 55 mm
Backflow protection unit type EB
K 9000E Säkerhetsblandare 40cc.jpg
No. FMM No. RSK Description
1 35781000 8592015 On/off handle, complete, chrome
1 35780040 8591995 On/off handle, complete, black
2 39031004 8592004 Cover, black, 2 pcs
3 35900800 8585849 Ceramic on/off headwork
4 38680009 8591701 Filter kit incl. o-rings and service tool
5 59820800 8591970 Inlet connector
6 38632006 8590311 Filter
7 38692800 8591974 Cover, chrome, 2 pcs
8 38601009 8591609 Thermostatic cartridge, complete, incl. service tool
9 38520007 8591592 Scalding protection ring, standard (black)
10 35780100 8591998 Temperature handle, complete, chrome
10 35780140 8591997 Temperature handle, complete, black
11 39710800 8591967 Nipple M18x1-G1/2 for shower mixer
12 39754000 8591969 Nipple M18x1 with o-ring for bath mixer
13 82990000 8154073 Swivel spout with integrated diverter
14 38086000 8439701 Locking screw
16 29710800 8591512 Wall plate, complete
17 38521000 8295345 Stop ring
18 29102650 8281547 Aerator insert, 20–24 l/min at 300 kPa


Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).


Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.


Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.