• With shower connection down
  • Pressure balanced thermostatic mixer
  • With ceramic sealed headwork
  • Temperature handle with safety stop at 38°C
  • With Eco-function
  • Approved non-return valves, EN-Standard EN1717
Backflow protection unit type EB
K Garda Säkerhetsblandare 160cc och 150cc och 40cc.jpg
No. FMM No. RSK Description
1 35730000 8591928 On/off handle
2 35710000 8591929 Eco indicating sleeve
3 35900000 8586325 Ceramic on/off headwork
4 38601009 8591609 Thermostatic cartridge, complete, incl. service tool
5 38680009 8591701 Filter kit incl. o-rings and service tool
6 59590000 8591930 Scalding protection ring
7 35740000 8591931 Temperature handle
8 59800000 8591543 Inlet connectors, 160 c/c
8 59810000 8591544 Inlet connectors 150-153 c/c (left-handed thread)
9 29830529 8591702 Non-return valves, 2 pcs
10 39710000 8591571 Nipple M22x1-G1/2 for shower mixer
11 39753000 8591516 Nipple for spout
12 96990000 8154058 Swivel spout with integrated diverter
13 38086000 8439701 Locking screw
14 59552410 8242172 Aerator M24 ext., without air admixture
15 29712000 8591530 Wall bracket for 40 c/c mixers, complete
16 59820000 8591545 Inlet connector for 40 c/c mixer
17 38521000 8295345 Stop ring


Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).


Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.


Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.