SILJAN basin mixer

Chrome, connection flat end Ø10 mm
Article number


  • With self-closing hand shower, wall bracket and hose
  • Cold Start
  • Soft closing with ceramic cartridge
  • Adjustable flow control and temperature limiter
  • With dish washer valve, switchable between cold and hot water. Pre-set on cold water
  • Swivel spout 120° or fixed
  • Approved non-return valves, EN-Standard EN1717
Backflow protection unit type EB
K Siljan Tvätt Lågpip med DM.jpg
No. FMM No. RSK Description
1 58501000 8592023 Complete lever, chrome
2 58511000 8592021 Cover lid with colour marking
3 58521000 8592020 Cover sleeve, chrome
4 58530140 8241726 Fastening nipple with service tool
5 60770000 8591918 Service tool
6 59120009 8591949 Ceramic cartridge with service tool, cold start (green ring)
6 59115500 8591947 Ceramic cartridge with service tool, standard (red ring)
6 59126000 8591966 Ceramic cartridge with service tool, Eco Plus (green ring)
7 29142400 8281526 Housing M24 ext., 13 mm
8 39142800 8186893 Fastening kit, for kitchen mixer with on/off valve
9 35974009 8592038 Care-kit
10 58504000 8592049 Care-lever, complete
11 34580000 8183837 Self-closing hand shower
12 34093000 8186018 Wall bracket, chrome
13 34881500 8181594 Shower hose, chrome, L=1,5 m
14 59291000 8186896 On/off valve for dishwasher, complete
15 59271000 8591843 Ceramic cartridge for dishwasher
16 58281000 8592036 Knob for dishwasher, chrome
17 29651501 8531502 Rough chrome plated
18 29390000 8295356 Fastening nipple
19 29102910 8281534 Aerator insert, 5,5–6,5 l/min at 300kPa
19 29102710 8281528 Aerator insert, 9–11 l/min at 300kPa


Accepted installation instructions

Safe Water Installation (Säker Vatteninstallation) is a set of industry* regulations to safeguard the quality of sanitary installations, prevent injury and damage and ensure compliance with the building regulations of the Swedish National Board of Housing, Building and Planning (Boverket).


Lead Free means that we have eliminated the lead that is normally found in brass alloys. This will reduce environmental impact of the products. Products classified as Lead Free contain less than 0.1 % lead.


Energy labelling is an objective rating system that shows exactly how much energy a mixer uses. The system was developed by a number of players including sanitary fittings manufacturers, building companies, property owners and authorities such as the Swedish Energy Agency. It is based on standardised laboratory tests and certification rules. Its aim is simple: to offer impartial help for buyers, installation firms, air conditioning consultants and consumers. The mixer’s energy performance is assessed by measuring and registering water pressure, mixed water temperature and flushing time for twelve different activities. The values registered for each of these activities are added together to obtain a total energy consumption value, which is displayed on the label. This total value determines the mixer’s energy rating.